Rtu Communication) - Mitsubishi Electric ME96SSE-MB User Manual

3. Setting
3.3 Setting Menu 2: Communication Settings (Setting the MODBUS
In the operation mode, press
becomes available.
Setting Menu
DISPLAY SET
®
①MODBUS
RTU
address
DISPLAY SET
®
②MODBUS
RTU
baud rates
DISPLAY SET
®
③MODBUS
RTU
parity
DISPLAY SET
®
④MODBUS
RTU
stop bit
SET
Setting Menu
SET RESET
+ simultaneously for 2 seconds or more, and the following operation
Set the setting menu number to "2".
(as shown in the right figure)
®
Set the MODBUS RTU address number.
Selectable addresses: 1 to 255
®
Set the MODBUS RTU baud rate.
2400bps
4800bps
9600bps
19.2kbps
38.4kbps
®
Set the MODBUS RTU parity.
non
odd
even（EVEn）
®
Set the MODBUS RTU stop bit.
Stop bit 1
According to the setting flow diagram (page 14), save the changed
contents, or continue to the other setting menu.
®

RTU communication)

Stop bit 2
- 19 -