Mitsubishi Electric ME96SSE-MB User Manual page 18

Hide thumbs Also See for ME96SSE-MB:
Table of Contents

Advertisement

3.Setting
3.2 Setting menu 1: Basic Settings (Setting the Phase Wire System, Display Pattern, VT/Direct Voltage,
CT Primary Current, etc.)
current
④CT
DISPLAY
SET
Continued form the previous page
(2)
When using VT
Set the secondary and primary voltages of the VT.
(a)
For 3-phase 4-wire(Phase to phase Voltage)
63.5V
100V
(b)
For 3-phase 3-wire (2CT, 3CT) or 1-phase 2-wire(phase to neutral
100V
Primary Voltage Settings
Default value
:200V
For 3-phase 4-wire
For 3-phase 3-wire or 1-phase 2-wire
(phase to neutral
voltage)
From top digit, select the value of the flickering digit by
The setting digit can be moved to right by
The setting digit can be moved to left by
Setting is available in range from
Less than 100V : Upper 2 digits setting
Over 100V : Upper 3 digits setting
※Error display (E05) appears when set out of 60Vto750000V range.
After that, please press
※When over 100V set over upper 3 digits setting, the display appear switching
upper 3 digits setting.
Press
at the lowest digit, the setting step will shift to the next one.
SET
Set the CT.
secondary Current Setting
Primary /
Set the secondary current
1A
5A
Note. CT is current transformers.
Set the primary current
Default
Setting:5.0A
From top digit, select the value of the flickering digit by
The setting digit can be moved to right by the
The setting digit can be moved to left by the
Setting is available in range from 1.0A to 30000.0A
Less than 10A : Upper 2 digits setting
Over 10A : Upper 3 digits setting
※Error display (E05) appears when set out of 1.0 to 30000.0A
range. After that, please press
and set it once again.
※When over 10A set over upper 3 digits setting, the display appear switching
upper 3 digits setting.
SET
Press
at the lowest digit, the setting step will shift to the next one.
110V
115V
120V
110V
220V
(Phase to phase Voltage)
:10000V
.
SET
.
DISPLAY
60V to 750000V.
, review the setting value and set it once
SET
.
SET
.
DISPLAY
, review the setting value
SET
- 17 -
voltage)
and
Again.
and
.

Advertisement

Table of Contents
loading

Table of Contents