3．2 Setting Menu 1: Basic Settings; Ct Primary Current, Etc); Time) - Mitsubishi Electric ME96SSE-MB User Manual

3. Setting
■
Basic Operations for setting
Function
Select a set value
Setting items are saved
Go back to the previous setting item
Skip removing setting items
during setting
3.2 Setting menu 1: Basic Settings (Setting the Phase Wire System, Display Pattern, VT/Direct Voltage,
Set the phase wire method, display pattern, VT/direct voltage, CT primary current, etc.
In the operation mode, after pressing
available.
Setting Menu
DISPLAY SET
①Phase Wire system
DISPLAY SET
②Display Pattern
DISPLAY SET
Operation
Press
Press
Press
Press and hold
CT Primary Current, etc.)
and simultaneously for 2 seconds or more, the following operation becomes
RESET
SET
Set the setting menu number to "1".
(as shown in the right figure)
Set the phase wire system.
3P4 : 3-phase 4-wire
3P3．2CT : 3-phase
3P3．3CT : 3-phase
1P3．1N2 : 1-phase
1P3．1N3 : 1-phase
1P2 : 1-phase 2 -wire
Set the display pattern.
The following table shows the measurement elements that can be displayed by
each display pattern. (For more details about display patterns, refer to page 45.)
In addition, if there is no display pattern that you want from P01 to P05),
select the special display pattern P00 to configure the screen freely.
( For more information about setting the special display pattern P00,
refer to page 31, 32.)
○： Displayable at this display setting.
△： Set at other additional settings.
□：
Select "P00" and set the display order and display position.
（1）For 3-phase 4-wire
○ ○
P01
○ ○
P02
○ ○
P03
○ ○
P04
○ ○
P05
□ □
P00
Note: The following settings are required for displaying elements on an additional display.
Measurement element on
additional display
Operation time
or .
＋ －
Setting item will be cared and shift to the next
.
SET
item.
.
The set value for the setting item just before
DISPLAY
Skip removing setting items returning is still
for 1 sec. available.
SET
Supplemental Information:
Underlined portions indicate
the default values.
3-wire（2CT）
(Same from here.)
3-wire（3CT）
3-wire（1N2 display）
3-wire（1N3 display）
○ ○ ○
○ ○ ○ ○ ○
○
○ ○
○ ○ ○
□ □ □ □ □
Setting item
Setting Menu 8 Operation time
display
- 15 -
Remarks
Fast-forward when pressed over 1 sec.
Additional
display
△
○ △
△
△
○ △
△ △
Reference
Pages
Page 27