High Altitude Mode; Hide Mode; Factory Reset; Software Update - JVC DLA-NZ9 Instructions Manual

High Altitude Mode

For setting the high altitude mode to "On" or "Off".
Set to "On" when using the projector at a location of low atmospheric pressure (higher than 900 m (3,000 ft) above sea
level).

Hide Mode

For reducing the power consumption through suppressing the current supply for the LD block when the [HIDE] button
is pressed to hide the image temporarily.
Setting
Off
On

Factory Reset

For restoring the settings of this unit to the factory default. However, the following settings will not be reset.
Gamma data saved in "Gamma" " "Correction Value" " "Import".
0
Color profile data saved in "Color Profile" " "Custom1 to Custom6".
0

Software Update

For performing a software update.
For the latest information on the software, refer to https://www3.jvckenwood.com/english/download/.

License

For displaying the license in use.
The illumination supply remains on when the [HIDE] button is pressed to hide the
image.
The illumination supply is turned off when the [HIDE] button is pressed to hide the
image.
Description
81