Mask; Top" / "Bottom" / "Left" / "Right; Anamorphic - JVC DLA-NZ9 Instructions Manual

Mask

For hiding the peripheral area of the image with a mask (black strip).
Setting
Off
On
Off

"Top" / "Bottom" / "Left" / "Right"

For specifying the ranges to hide by masking (with black strips).
Setting range: 0 to 220
0

Anamorphic

Configure this setting when an anamorphic lens is used.
Setting
Off
A
B
C
D
Not masked.
Hides the ranges specified in "Top", "Bottom", "Left" and "Right" by masking (with
black strips).
Projects the 2.35:1 image without any changes.
Projects the 2.35:1 image with it stretched in the vertical direction only using a 3840
pixel width.
Projects the 16:9 image with it compressed in the horizontal direction only.
This is a mode used exclusively for the DCR lens of Panamorph.
Projects the image by stretching 2.35:1 video images in the vertical direction and
enlarging them in the horizontal direction to the maximum panel width of 4096
pixels.
This is configured to "A" in the 3D mode.
This is a mode used exclusively for the DCR lens of Panamorph.
Projects the 16:9 image with it compressed in the horizontal direction only.
Description
On
Mask: black strip around the
periphery
Description
75