Adjusting The Position - JVC DLA-NZ9 Instructions Manual

Adjusting the Position

Adjusting the elevation angle of the projector
The height and inclination of the unit (0 to 5 mm (0 to 0.2 in)) can be adjusted by turning the feet.
Lift the unit and adjust the four feet.
Extend
Feet
Adjusting the position of the image
By using the lens shift feature of this unit, you can shift the image upward/downward or to the left/right. Set it to your
preferred position.
Æ "Adjusting the Lens According to the Projection Position" (P. 28)
Horizontal Position
Vertical Position: 0% (Center)
Up to about 43% x 5 and 34%
y z 6 7 of the projected image *
Vertical Position
Horizontal Position: 0 % (Center)
Up to about 100% x 5 and 80%
y z 6 7 of the projected image *
* 16:9 image
22
Contract
Lens Shift Range (16:9)
x 5
y z 6 7
The maximum vertical shift varies with the amount of
0
horizontal shift. Similarly, the maximum horizontal shift
also changes with the amount of vertical shift.
The values on the graph are intended as a guide. Use
0
them for reference during installation.
4 Locations
120
100
80
60
40
20
0 10 20 30
Amount of horizontal shift (%)
90
80
70
60
50
40
30
20
10
0 10 20 30
Amount of horizontal shift (%)
40 50
40 50