Remote Code - JVC DLA-NZ9 Instructions Manual

Remote Code

For changing the remote control code.
Setting
A
B
You need to configure the remote control according to the settings of this unit.
0
On the remote control unit, press the [MENU] button for three seconds or longer while pressing and hold the [BACK]
button to switch the code.
The backlight of the remote control blinks 3 times: change the remote control code to "A"
0
The backlight of the remote control blinks 2 times: change the remote control code to "B"
0
If the setting differs between this unit and the remote control, the "STANDBY/ON" indicator blinks in green when
0
receiving the remote control code.
WARNING LIGHT STANDBY/ON ANDBY/O
(Green)
80
Change the remote control code from "B" to "A".
Change the remote control code from "A" to "B".
Description