Information; High Altitude Mode; Factory Reset; Software Update - JVC DLA-NX5 Instructions Manual

High Altitude Mode

For setting the high altitude mode to "On" or "Off".
Set to "On" when using the projector at a location of low atmospheric pressure (higher than 900 m (3,000 ft) above sea
level).

Factory Reset

For restoring the settings of this unit to the factory default. However, the following settings will not be reset.
Gamma data saved in "Gamma" " "Correction Value" " "Import".
0
Color profile data saved in "Color Profile" " "Custom1 to Custom6".
0

Software Update

For performing a software update.
For the latest information on the software, refer to http://www3.jvckenwood.com/english/download/.

Information

Setting
Input
Source
(Displayed only during video signal input)
Resolution
(Displayed only during PC signal input)
H Frequency
V Frequency
Color Depth
Color Space
Colorimetry
HDR
Max CLL/Max FALL
Lamp Time
Soft Ver.
Displays the currently selected video input terminal.
Displays the input source.
Displays the image resolution.
Displays the horizontal frequency.
Displays the vertical frequency.
Displays the color space and color bit depth of the input video signal.
The color bit depth is not displayed when "YCbCr422" is input.
0
The color bit depth is displayed when color bit depth information is received
0
from the source device.
Displays the Colorimetry of the input signal.
Displays the EOTF information when HDR packet is received.
Displays the mastering information of the contents during HDR playback.
Max CLL: Maximum Content Light Level
Max FALL: Maximum Frame Average Light Level
The information may not be displayed depending on the player and contents.
0
Displays the number of lamp hours used.
Displays the firmware version.
Description
63