Connecting The Projector; Connecting To The Hdmi Input Terminal (Digital Input) - JVC DLA-NZ9 Instructions Manual

Connecting the Projector

Do not turn on the power until connection is complete.
0
The connection procedures differ according to the device used. For details, please refer to the instruction manual of
0
the device to be connected.
This projector is used for projecting images. To output the audio of connected devices, please connect a separate
0
audio output device, such as an amplifier or speaker.
Projector has no audio pass through or eARC output.
0
The images may not be displayed depending on the devices and cables to be connected. When using an HDMI
0
cable (sold separately), make use of one with the Ultra High Speed HDMI Cable certification (supports 48 Gbps).
Also, please refer to "HDMI EDID Setting"P. 68.
0
Some cables cannot be connected to this unit due to the size of their connector cover.
0
Configuration of a network password is necessary before connecting to the LAN terminal. For details, refer to
0
"Network Password"P. 79.
(DLA-NZ9BK, DLA-NZ8BK, DLA-NZ7BK, DLA-RS4100K, DLA-RS3100K, DLA-RS2100K)

Connecting to the HDMI Input Terminal (Digital Input)

Connecting via HDMI cable
This Unit
To [HDMI 1] or [HDMI 2]
input terminal
If noise occurs, move the laptop away from this unit.
0
Connecting through an AV amplifier
This Unit
To [HDMI 1] or [HDMI 2]
input terminal
If the source device is connected to the projector through an intermediate device such as an AV amplifier or divider,
0
the video image may not appear depending on the specifications of the intermediate device.
In this case, connect the source device directly to the projector, and check whether the video image is displayed.
HDMI Cable (Sold Separately)
HDMI Cable (Sold Separately) HDMI Cable (Sold Separately)
BD/DVD Recorder, etc.
HDMI Output Terminal
BD/DVD Recorder, etc.
HDMI Cable
(Sold Separately)
Laptop, etc.
Speakers
Speaker
Cable (Sold
Separately)
AV Amplifier
23