High Altitude Mode; Hide Mode X Y Z 5 6 7; I Lamp Reset 4 8; Factory Reset - JVC DLA-NP5 Instructions Manual

High Altitude Mode

For setting the high altitude mode to "On" or "Off".
Set to "On" when using the projector at a location of low atmospheric pressure (higher than 900 m (3,000 ft) above sea
level).

Hide Mode x y z 5 6 7

For reducing the power consumption through suppressing the current supply for the LD block when the [HIDE] button
is pressed to hide the image temporarily.
Setting
Off
On
Lamp Reset 4 8
Resets the lamp time.
Æ "Resetting the Lamp Time 4 8" (P. 93)

Factory Reset

For restoring the settings of this unit to the factory default. However, the following settings will not be reset.
Gamma data saved in "Gamma" " "Correction Value" " "Import".
0
Color profile data saved in "Color Profile" " "Custom1 to Custom6".
0

Software Update

For performing a software update.
For the latest information on the software, refer to https://www3.jvckenwood.com/english/download/.

License

For displaying the license in use.
The illumination supply remains on when the [HIDE] button is pressed to hide the
image.
The illumination supply is turned off when the [HIDE] button is pressed to hide the
image.
Description
89