Clear Motion Drive; Motion Enhance - JVC DLA-NZ9 Instructions Manual

Clear Motion Drive (C.M.D.)
Optimal interpolation according to the content is made possible with the new high-definition image interpolation
technique.
For some scenes, interpolation may cause distortion in the image. In this case, set to "Off".
Original Image
Interpolation Enabled
Intermediate Frame Generation
1

Motion Enhance

You can reduce motion blur with this function enhancing the response of D-ILA image devices.
If the image outline is unnatural, set this item to "Off".
Press the [MENU] button to display the menu and select "Picture Adjust"""Motion
1
Control"""Motion Enhance"
Setting
Off
Low
High
Intermediate Frame Generation
Press the [C.M.D.] button, use the [JK] keys to select a
1
setting, followed by pressing [OK]
You can also perform the setting by pressing the [MENU] button to display
0
the menu followed by selecting "Picture Adjust"""Motion Control"""Clear
Motion Drive".
Setting
Off
Low
High
Inverse Telecine
* C.M.D. is the abbreviation for Clear Motion Drive.
* This item cannot be set when "Low Latency" is set to "On".
* This item cannot be configured when the input signal is 100Hz/120Hz.
Does not perform correction.
Decreases jitter for fast moving video.
Further reduces image blurring than "Low".
Description
Interpolation is not performed.
Improves motion lag for movie type images.
Improves motion lag fast moving sports type images.
60i/60p video images such as those of TVs and DVDs.
Suitable for original images that are 24-frame film sources.
Does not function for 24p video images.
0
Description
53