Hdr Processing; Correction Value - JVC DLA-NZ9 Instructions Manual

HDR Processing

This is a feature for configuring the content analysis method using "Tone Mapping" when "Picture Mode" is configured
to "Frame Adapt HDR".
*1 This item is not available when "Content Type" is set to "SDR".
*2 When "Picture Mode" is configured to "HDR10+", "HDR Processing" is fixed at "HDR10+". "HDR10+" is used only
when the Picture Mode is configured to "HDR10+".
*3 When "Picture Mode" is configured to "HDR10""Pana_PQ""HLG""User 4 to User 6", "HDR Processing" is fixed
at "Static".
Setting
Frame by Frame
Scene by Scene
Static
HDR10+
Gamma/Tone Mapping
This item adjusts "Gamma/Tone Mapping" according to the preconfigured "Picture Mode" (output value of the projected
video with respect to the video signal input). It is also used to adjust the preconfigured "Gamma/Tone Mapping" setting.
Æ "Adjusting the Output Value of the Projected Image (Gamma/Tone Mapping)" (P. 47)
The available "Gamma/Tone Mapping" settings vary according to the "Picture Mode".
0
*1 When "Picture Mode" is set to "HDR10+", the setting is fixed at "HDR(Auto)".
*2 "Gamma/Tone Mapping" cannot be configured when "Picture Mode" is configured to "Frame Adapt HDR".

Correction Value

For setting the base gamma for the adjustment of "Picture Tone", "Dark Level" and "Bright Level" when one of the
"Custom 1" to "Custom 3" settings is selected in Gamma/Tone Mapping.
Æ "Fine-tuning of Gamma/Tone Mapping to Preferred Settings" (P. 50)
Color Selection
For selecting the color for adjusting "Picture Tone", "Dark Level" and "Bright Level".
Æ "Fine-tuning of Gamma/Tone Mapping to Preferred Settings" (P. 50)
Picture Tone
Adjusts the overall brightness automatically for a well-balanced result without compromising the gradation of the image.
Æ "Fine-tuning of Gamma/Tone Mapping to Preferred Settings" (P. 50)
Æ "Performing Tone Mapping Manually" (P. 44)
Dark Level / Bright Level
You can adjust the image quality to produce a sharp contrast in the brightness.
Æ "Fine-tuning of Gamma/Tone Mapping to Preferred Settings" (P. 50)
Æ "Performing Tone Mapping Manually" (P. 44)
62
Automatically adjusts the HDR tone mapping after analyzing the peak brightness
of each frame.
Automatically adjusts the HDR tone mapping after analyzing the peak brightness
of each scene.
Configures based on the mastering information (MaxCLL/FALL) of the content and
does not make any dynamic adjustment.
Automatically adjusts the brightness for each scene based on the HDR10+ image
*2
information.
Description