Picture Adjust; Content Type; More Settings; Ld Power - JVC DLA-NZ9 Instructions Manual

Picture Adjust

Content Type

Changes the available picture modes according to the type of content for viewing.
Æ "Setting the Picture Mode" (P. 32)
Picture Mode
You can adjust the image quality according to the type of video image you are viewing.
Æ "Setting the Picture Mode" (P. 32)

More Settings

Changes the preconfigured "Picture Mode" setting.

LD Power

For switching the brightness of the LD block.
Setting
Low
Mid
High
The factory setting varies with the "Picture Mode".
0

Dynamic CTRL

Expands the dynamic range of video expression through controlling the brightness of the light source based on image
analysis.
Æ "Reducing the Delay and After-image of Fast-moving Images (Motion Control)" (P. 52)
Setting
Off
Mode 1
Mode 2
* This item is not available when "Low Latency" is set to "On".

Aperture

For changing the brightness through controlling the aperture.
Setting range: -15 (stops down) to 0 (opens up)
0
Brightness (low)
Brightness (mid)
Brightness (high)
Does not control.
Expands the dynamic range of video expression.
With weaker control than "Mode 2", the change is gentle.
Expands the dynamic range of video expression.
With stronger control than "Mode 1", it will change clearly according to the scene.
Description
Description
57