Ford 1996 Contour Manual page 75

6
Instrument Panel Controls
PNL/FLR
Select PNL/FLR to get air flow to the floor and through the
instrument panel registers at the same time. This selection can
be used to either heat or ventilate your vehicle.
FLOOR
Air flow will be to the floor when FLOOR is selected. The air
cannot be cooled in the FLOOR position but can be heated by
rotating the temperature control knob into the RED area.
FLR/DEF
Select FLR/DEF to get air to the floor and windshield defrosters
at the same time.
V DEF
Select V DEF to obtain maximum air flow to the windshield.
Rotate the temperature control knob into the RED area for the
air temperature required to defrost. Rotate the H knob to
increase the air flow.
73