Ford 1996 Contour Manual page 171

Remove the jack and fully tighten the lug nuts in the order
6.
shown in the following illustration. As soon as possible, have
your dealer or a qualified service technician check the lug
nuts for proper torque specifications.
The lug nuts on the wheel
Place any wheel covers and ornaments in the trunk.
7.
Put the tire, jack, and wrench away. Make sure the jack is
8.
securely fastened so it does not rattle when you drive.
Unblock the wheels.
9.
Removing and Replacing Styled Polycast Wheel
Ornaments
To remove a wheel ornament, insert the tapered end of the jack
handle between the ornament and wheel and pry the ornament
from the wheel.
To install the polycast wheel center ornament, you should insert
one side of the ornament into the center of the wheel opening
and strike the opposite side with the palm of your hand until
the ornament is seated in the opening.
Roadside Emergencies
173