Filling The Fuel Tank - Ford 1996 Contour Manual

Cleaning the Engine
A clean engine is more efficient because a buildup of grease and
dirt acts as an insulator, keeping the engine warmer than usual.
Extreme care must be used if a power washer is used to
clean the engine. The high pressure fluid could penetrate
sealed parts and assemblies causing damage or malfunctions.
In order to avoid possible cracking of the engine block or
fuel injection pump, do not spray a hot engine or injection
pump with cold water.
The alternator, distributor and air intake must be covered.
Covering these components will help prevent water damage.
Never wash or rinse the engine while it is running. Water
getting into the engine may cause internal damage.

Filling the Fuel Tank

Fuel Filler Door Release (If equipped)
On some models, the fuel filler door cannot be opened from
outside the vehicle. To unlatch the fuel filler door, find the front
end of the release handle on the floor to the left of the driver's
seat. Push the handle down firmly until it stops and the door
pops open.
The fuel filler door release
If the fuel filler door does not open when you push the release
handle, open the trunk and find the override release on the
202