Cisco Catalyst 9500 Manual page 46

Configuring MAC Address Move Notification Traps
Command or Action
172.20.10.10 traps private mac-notification
Step 4
snmp-server enable traps mac-notification move
Example:
Device(config)# snmp-server enable traps
mac-notification move
Step 5 mac address-table notification mac-move
Example:
Device(config)# mac address-table
notification mac-move
Step 6 end
Example:
Device(config)# end
Step 7 show running-config
Example:
Device# show running-config
Step 8 copy running-config startup-config
Example:
Device# copy running-config startup-config
What to do next
To disable MAC address-move notification traps, use the no snmp-server enable traps mac-notification
move global configuration command. To disable the MAC address-move notification feature, use the no mac
address-table notification mac-move global configuration command.
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
32
Purpose
• version Specifies the SNMP version to support.
Version 1, the default, is not available with informs.
• community-string Specifies the string to send with
the notification operation. Though you can set this
string by using the snmp-server host command, we
recommend that you define this string by using the
snmp-server community command before using the
snmp-server host command.
• notification-type Uses the mac-notification keyword.
Enables the device to send MAC address move notification
traps to the NMS.
Enables the MAC address move notification feature.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Administering the Device