Cisco Catalyst 9500 Manual page 257

Working with the Flash File System
608488
608437
632745
632746
608418
system-report_RP_0_20150708-111832-UTC.tar.gz
608491
608492
11250098176 bytes total (9128050688 bytes free)
Device#
Changing Directories and Displaying the Working Directory
Follow these steps to change directories and to display the working directory:
SUMMARY STEPS
1. enable
2. dir filesystem:
3. cd directory_name
4. pwd
5. cd
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
dir filesystem:
Example:
Device# dir flash:
Step 3 cd directory_name
Example:
Device# cd new_configs
Step 4
pwd
Example:
Device# pwd
Step 5 cd
Example:
-rw- 98869 Sep 25 2015 11:42:15 +00:00
-rwx 17866 Jul 16 2015 04:01:10 +00:00
drwx 4096 Aug 20 2015 11:35:09 +00:00
drwx 4096 Sep 16 2015 08:57:44 +00:00
-rw- 1595361
-rw- 67587176 Aug 12 2015 05:30:35 +00:00
-rwx 74880100 Aug 12 2015 05:30:57 +00:00
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
Changing Directories and Displaying the Working Directory
Jul 8 2015 11:18:33 +00:00
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays the directories on the specified file system.
For filesystem:, use flash: for the system board flash device.
Navigates to the specified directory.
The command example shows how to navigate to the
directory named new_configs.
Displays the working directory.
Navigates to the default directory.
memleak.tcl
ardbeg_x86
CRDU
ardmore
mcln_x86_kernel_20170628.SSA
stardust.x86.idprom.0718B
243