Example: Configuring A Login Banner; Example: Configuring Mac Address Change Notification Traps; Example: Configuring Mac Threshold Notification Traps - Cisco Catalyst 9500 Manual

Administering the Device
Trying 192.0.2.15...
Connected to 192.0.2.15.
Escape character is '^]'.
This is a secure site. Only authorized users are allowed.
For access, contact technical support.
User Access Verification
Password:

Example: Configuring a Login Banner

This example shows how to configure a login banner by using the dollar sign ($) symbol as the beginning
and ending delimiter:
Device(config)# banner login $
Access for authorized users only. Please enter your username and password.
$
Device(config)#

Example: Configuring MAC Address Change Notification Traps

This example shows how to specify 172.20.10.10 as the NMS, enable MAC address notification traps to the
NMS, enable the MAC address-change notification feature, set the interval time to 123 seconds, set the
history-size to 100 entries, and enable traps whenever a MAC address is added on the specified port:
Device(config)# snmp-server host 172.20.10.10 traps private mac-notification
Device(config)# snmp-server enable traps mac-notification change
Device(config)# mac address-table notification change
Device(config)# mac address-table notification change interval 123
Device(config)# mac address-table notification change history-size 100
Device(config)# interface gigabitethernet1/2/1
Device(config-if)# snmp trap mac-notification change added

Example: Configuring MAC Threshold Notification Traps

This example shows how to specify 172.20.10.10 as the NMS, enable the MAC address threshold notification
feature, set the interval time to 123 seconds, and set the limit to 78 per cent:
Device(config)# snmp-server host 172.20.10.10 traps private mac-notification
Device(config)# snmp-server enable traps mac-notification threshold
Device(config)# mac address-table notification threshold
Device(config)# mac address-table notification threshold interval 123
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
Example: Configuring a Login Banner
39