AJAX Hub 2 Plus User Manual page 7

Ignore Network Registration Error — when this setting is activated, the hub ignores
errors when trying to connect via a SIM card. Activate this option if the SIM card cannot
connect to the network
Disable communication check with operator — when this setting is activated, the hub
ignores operator communication errors. Activate this option if the SIM card cannot
connect to the network
SIM card 1 — displays the number of the SIM card installed. Click on the eld to go to
the SIM card settings
SIM card 2 — displays the number of the SIM card installed. Click on the eld to go to
the SIM card settings
SIM card settings
Connection settings
APN, User name, and Password — settings for connecting to the Internet via a SIM
card. To nd out the settings of your cellular operator, contact your provider's support
service.
How to set or change APN settings in the hub
Mobile data usage
Incoming — the amount of data received by the hub. Displayed in KB or MB.
Outgoing — the amount of data sent by the hub. Displayed in KB or MB.
Keep in mind that data is counting on the hub and may differ from your operator's statistics.
Reset statistics — resets statistics on incoming and outgoing tra c.
Check balance
USSD code — enter the code that is used to check the balance in this eld. For example,
*111#. After that, click Check balance to send a request. The result will be displayed
under the button.
Geofence — con guring reminders for arming/disarming the security system when
crossing a speci ed area. The user location is determined using the smartphone GPS
module.
What geofences are and how they function
Groups — group mode con guration. This allows you to:
Manage the security modes for separate premises or groups of detectors.
For example, the o ce is armed while the cleaner works in the kitchen.
Delimit access to control of security modes.
For example, the marketing department employees do not have access to the law
o ce.
OS Malevich 2.6: a new level of security
Security Schedule — arming/disarming the security system by the schedule.
How to create and con gure a scenario in the Ajax security system
Detection Zone Test — running the detection zone test for the connected detectors. The
test determines the su cient distance for the detectors to register alarms.
What is Detection Zone Test