AJAX Hub 2 Plus User Manual page 10

Fire detectors settings
Settings menu of FireProtect and FireProtect Plus re detectors. Allows con guring
interconnected FireProtect alarms of re detectors.
The feature is recommended by European re standards, which require, in the event of a
re, a warning signal power of at least 85 dB at 3 meters from the sound source. Such
sound power wakes up even a soundly sleeping person during a re. And you can quickly
disable triggered re detectors using the Ajax app, Button, or KeyPad.
Learn more
System Integrity Check
The System integrity check is a parameter that is responsible for checking the status of all
security detectors and devices before arming. Checking is disabled by default.
Learn more
Alarm Con rmation
This setting is only available in PRO Ajax apps
Alarm con rmation is a special event that the hub sends to the CMS and system users if
several certain devices have triggered within a speci ed period of time. By responding to
con rmed alarms only, the security company and the police reduce the number of visits on
false alarms.
Learn more
Restoration After Alarm
This setting is only available in PRO Ajax apps
The feature does not allow arming the system if an alarm has been registered previously.
For arming, the system should be restored by an authorized user or PRO user. The types of
alarms that require system restore are de ned when con guring the function.
The function eliminates situations when the user arms the system with detectors that
generate false alarms.
Learn more
Arming/Disarming Process
This setting is only available in PRO Ajax apps
The menu allows to enable arming in two stages, as well as set Alarm Transmission Delay
for security system disarming process.
What is Two-Stage Arming and why is it needed
What is Alarm Transmission Delay and why is it needed
Devices Auto Deactivation
This setting is only available in PRO Ajax apps
The Ajax security system can ignore alarms or other events of devices without removing
them from the system. Under certain settings, noti cations about events of a speci c
device will not be sent to the CMS and security system users.
There are two types of Devices Auto Deactivation: by the timer and by the number of
alarms.
What is Devices Auto Deactivation
It is also possible to manually disable a speci c device. Learn more about deactivating
devices manually here .
Clear noti cations history
Clicking the button deletes all noti cations in the hub events feed.