BORETTI CFBG902AN Instruction On Mounting And Use Manual page 226

REPLACEMENT
INJECTORS OF THE BURNERS
Select the injectors to be replaced
according to the "Table for the choice of the
injectors".
The nozzle diameters,
hundredths of a millimetre, are marked on
the body of each injector.
If the injectors are not supplied they can
be obtained from the "Service Centre".
REPLACEMENT OF THE INJECTORS
OF THE COOKTOP BURNERS
To replace the injectors proceed as follows:
• Remove pan supports and burners
from the cooktop.
• Using a wrench, substitute the nozzle
injectors "J" (figs. 9.10, 9.11) with
those most suitable for the kind of gas
for which it is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
Dual burner
Fig. 9.11
226
Gas maintenance
OF THE
expressed in
J
Injectors for
Injector for
outer crown
inner crown
Auxiliary,
Semi-rapid and
Rapid burners
Fig. 9.10
J
J