Remote Hatch Release - Chevrolet 1995 Corvette Owner's Manual

Table of Contents

Advertisement

To replace your battery:
Remote Hatch Release
1.
2.
3.
4.
5 .
Insert a screwdriver in the slot on the back of the
transmitter and gently pry apart the front and back.
Gently pry the battery out of the transmitter using the
screwdriver.
Put the new battery in the transmitter, positive
(+)
side up. Use
a
Duracell@ battery, type DL2450, or
equivalent.
Put the two halves back together. Make sure the
halves are together tightly so water won't get in.
Test the transmitter.
Press the switch in your center console to unlock the
hatch from inside your vehicle. If you have an automatic
transmission, your shift lever must be in PARK (P) or
NEUTRAL (N) to use the switch. If you have a manual
transmission, you must set the parking brake before you
can use the switch when the vehicle is running. If you
have a manual transmission and the vehicle is not
running, you may use the switch in any gear.
2-9

Advertisement

Table of Contents
loading

Table of Contents