Table of Contents
Advertisement
However, if you accidentally use a key that has a
damaged or missing resistor pellet, you will see no
SECURITY light. You don't have to wait three minutes
before trying the proper key.
If the resistor pellet is damaged or missing, the starter
won't work. Use the other ignition key, and see your
Chevrolet dealer or a locksmith who can service the
PASS-Key@ to have a new key made.
If the SECURITY light comes on while driving, have
your vehicle serviced as soon as possible.
If you lose or damage a PASS-Key@ ignition key, see
your Chevrolet dealer or a locksmith who can service
PASS-Key? In an emergency, call the Chevrolet
Roadside Assistance Program at 1 -800-CHEV-USA
(1-800-243-8872).
New Vehicle "Break-In"
NOTICE:
Your modern Corvette doesn't need an elaborate
"break-in." But it will perform better in the long
run if you follow these guidelines:
Keep your speed at 55 mph (88 km/h) or
less for the first
500
miles (804 km).
Don't drive at any one speed
--
fast or
slow
--
for the first 500 miles (804 km).
Don't make full-throttle starts.
200 miles (322 km) or so. During this time
your new brake linings aren't yet broken
in. Hard stops with new linings can mean
premature wear and earlier replacement.
Follow this "breaking-in" guideline every
time you get new brake linings.
Avoid making hard stops for the first
2-15
Advertisement
Table of Contents
