Table of Contents
Advertisement
A green arrow on the instrument panel will flash in the
direction of the turn or lane change.
To signal
a lane change, just raise or lower the lever
until the green arrow starts to flash. Hold it there until
you complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don't
flash but just stay on, a signal bulb may be'burned out
and other drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the green arrows don't go on at all when you
signal a turn, check the fuse (see "Fuses" in the Index)
and
for burned-out bulbs.
Headlamp HighLow Beam
P
1
1
To change the headlamps from low beam to high or high
to low, pull the turn signal lever all the way toward you.
Then release it. When the high beams are on, this blue
light on the instrument panel also will be on.
2-40
Advertisement
Table of Contents
