Table of Contents
Advertisement
Remember: Anti-lock doesn't change the time you need
to get your foot up to the brake pedal. If you get too
close to the vehicle in front of you, you won't have time
to apply your brakes if that vehicle suddenly slows or
stops. Always leave enough room up ahead to stop, even
though you have anti-lock brakes.
To Use Anti-Lock
Don't pump the brakes. Just hold the brake pedal down
and let anti-lock work for you. You may hear a motor or
clicking noise and feel the brake pedal move a little
during a hard stop, but this is normal. When your
anti-lock system is adjusting brake pressure to help
avoid a braking skid, the ABS ACTIVE light will come
on. See "Anti-Lock Brake System Active Light" in the
Index.
ASR (Acceleration Slip Regulation) System
Your vehicle has a traction control system called ASR
that limits wheel spin. This is especially useful in
slippery road conditions. The system operates only if it
senses that the rear wheels are spinning too much or are
beginning to lose traction. When, this happens, the
system works the rear brakes and reduces engine power
(by closing the throttle and managing engine spark) to
limit wheel spin.
'The ASR ACTIVE light will come on when the ASR
system is limiting wheel spin. See "ASR System Active
Light" in the Index. You may feel the system working,
or you may notice some noise, but this is normal.
If your vehicle is in cruise control when the ASR system
begins to limit wheel spin, the cruise control will
automatically disengage. When road conditions allow
you to safely use it again, you may re-engage the cruise
control. (See "Cruise Control" in the Index.)
SERVICE
ASR
The SERVICE ASR
warning light will
come on to let you
know if there's a
problem with your
ASR system.
See "ASR System Warning Light'' in the Index. When
this warning light is on, the system will not limit wheel
spin. Adjust your driving accordingly. (The ASR OFF
light will also come on when the SERVICE ASR
warning light comes on.)
4-8
Advertisement
Table of Contents
