Decommissioning And Disposal - Siemens SIMATIC NET RUGGEDCOM RS950G Installation Manual

ALARM LED
HSR LED
PRP LED
Port Status LEDs
Communication Ports
RS232 Serial Console Port
Failsafe Alarm Relay Terminal
Power Supply Terminal
1.3

Decommissioning and Disposal

Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated Configuration Manual.
Recycling and Disposal
For environmentally friendly recycling and disposal of this device and related
accessories, contact a facility certified to dispose of waste electrical and electronic
equipment. Recycling and disposal must be done in accordance with local
regulations.
RUGGEDCOM RS950G
Installation Manual, 01/2021, C79000-G8976-1037-06
1.3 Decommissioning and Disposal
Illuminates when an alarm condition exists.
Illuminates when the device is in HSR Redbox mode.
Illuminates when the device is in PRP Redbox mode.
Indicate the status of each port:
State
Solid
Blinking
Off
Receive and transmit network traffic, as well as provide remote Web
access to the RUGGEDCOM RUGGEDCOM RS950G operating system.
For more information, refer to:
• "Connecting to the Device (Page 15)"
• "Copper Ethernet Ports (Page 17)"
• "Copper Ethernet Port Specifications (Page 22)"
• "SFP Transceivers (Page 18)"
For interfacing directly with the device and accessing initial
management functions. For information about connecting to the
device via the serial console port, refer to
(Page 15)".
Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
• "Connecting the Failsafe Alarm Relay (Page 9)"
• "Failsafe Relay Specifications (Page 21)"
A pluggable terminal block. For more information, refer to:
• "Connecting Power (Page 10)"
• "Power Supply Specifications (Page 21)"
Introduction
Description
Link established
Link activity
No link/activity
"Connecting to the Device
3