Table of Contents
Advertisement
Introduction
1.4 Decommissioning and disposal
H10
H15
H16
H17
H18
H20
H19
Slot 6 options
J00
J01
J02
J04
J06
J07
J10
J15
J16
J17
J18
J20
J19
1.4
Decommissioning and disposal
Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated "RUGGEDCOM ROX Configuration
Manual".
Recycling and disposal
This device is low in pollutants, can be recycled, and meets the requirements of the
WEEE directive 2012/19/EU for the disposal of electrical and electronic equipment.
8
Option
M4FX11 = 4x 100FX multimode, 1310nm LC 2km
MS01 = 8x RS232/RS422/RS485 via DB9
M4CG02 = 4x 10/100/1000TX microD
M4FG01 = 4x 1000SX multimode, 850nm LC 500m
M4FG03 = 4x 1000LX singlemode, 1310nm LC 10km
MPRP = 1x Pair (A/B) Gigabit PRP with 2x single-mode 10km Conformal Coating
M4FG05 = 4x 1000LX singlemode, 1310nm LC 25km
Option
XX = Blank Module
M16TX01 = 16x 10/100 BaseTX RJ45
M8TX02 = 8x 10/100 BaseTX MicroD
M8FX11 = 8x 100FX multimode, 1310nm LC 2km
M8FX06 = 8x 100FX singlemode, 1310nm LC 20km
M8FX08 = 8x 100FX singlemode, 1310nm LC 50km
M4FX11 = 4x 100FX multimode, 1310nm LC 2km
MS01 = 8x RS232/RS422/RS485 via DB9
M4CG02 = 4x 10/100/1000TX microD
M4FG01 = 4x 1000SX multimode, 850nm LC 500m
M4FG03 = 4x 1000LX singlemode, 1310nm LC 10km
MPRP = 1x Pair (A/B) Gigabit PRP with 2x single-mode 10km Conformal Coating
M4FG05 = 4x 1000LX singlemode, 1310nm LC 25km
Description
Description
Equipment Manual, 11/2023, C79000-G8976-1059-16
RUGGEDCOM MX5000
Advertisement
Table of Contents
