Copper Ethernet Port Specifications; Operating Environment; Mechanical Specifications - Siemens SIMATIC NET RUGGEDCOM RS950G Installation Manual

Technical Specifications
5.4 Copper Ethernet Port Specifications
Standard
802.1Q
IEEE 802.1p
5.4

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RS950G.
Speed Connector
100Base-TX RJ-45
100/1000Base-
RJ-45
TX
a
Auto-Negotiating
b
Shielded or unshielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
5.5

Operating Environment

Ambient Operating
Temperature
Ambient Relative
Humidity
Ambient Storage
Temperature
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Operating temperature may vary based on the limitations of installed SFPs. Refer to the RUGGEDCOM
SFP Transceivers Catalog for SFP temperature ratings.
c
Non-condensing.
5.6

Mechanical Specifications

Weight
Ingress Protection
Enclosure
22
10 Mbps 100 Mbps
Ports
IEEE
ü
ü
a
Duplex
FDX/HDX
FDX/HDX
-40 to 85 °C (-40 to 185 °F)
ab
5% to 95%
c
-40 to 85 °C (-40 to 185 °F)
1.22 kg (2.7 lb)
IP30
20 AWG Galvanized Steel
1000 Mbps Ports
Ports
ü ü
ü ü
Wiring
b
Cable Type
Standard
> CAT 5 TIA/EIA T568A/B
> CAT 5 TIA/EIA T568A/B
Notes
VLAN (Virtual LAN)
Priority Levels
Maximum
c d
Distance
100 m (328 ft)
100 m (328 ft)
Installation Manual, 01/2021, C79000-G8976-1037-06
e
Isolation
1.5 kV
1.5 kV
RUGGEDCOM RS950G