Table of Contents
Advertisement
3.
The black and bold text on white background means that it is the DFS channel, wh ile the white text on
the black background is the non-DFS channel.
4.
When the device detects the USB d isk connected, the USB d isk detection display lights up.
5.
When the voltage is too low, the low battery alarm will be triggered and the icon will flash slowly .
Caution
1.
When the receiver is not connected, it will not display the hotpot number.
2.
When the receiver is turned on, the channel number will not be displayed
connected with transmitter.
CHANNEL CHANGE
Press the channel button "UP/DOW N" on the transmitter or receiver to change the current channel.
Press "OK" to confirm the channel, then the channel of the transmitter and receiver will be
automaticallyandsynchronously changed.
DEVICE UPGRADE
1.
Copy upgrade
firmware to a USB stick.
2.
Insert the USB stick into the OTG converter andconnect
the transmitter.
3.
Reset the device, and enter into upgrade interface.
Once the upgrade is complete, it will display "upgrade successfully", and device will be
4.
automatically upgraded.
Caution
USB disk should be at FAT32 or exFAT format.
QUICK GUIDE
Transmitter
Long press "OK" button for about 3 seconds, enteringintothe root menu interface, it includes scene
1.
mode, system setting, version information options.
Select "SCENE M ODE", then click "OK" button, you can select "IMAGE MODE", "BALA NCE
2.
MODE", "SPEED MODE".
Select "SYSYTEM SETTING",then clicking "OK" button, you can select "LANGUA GE
3.
(Ch inese/English)",
"PAIR", "RESET".
Select "VERSION INFO", thenclick "OK" button, you can check the version informat ion.
4.
Recei ver
before the receiver is
it
with the USB Type-C upgrade interface on
7
Advertisement
Table of Contents
