Hollyland MARS 400S PRO Manual
- User manual (19 pages) ,
- User manual (16 pages)
Advertisement
KEY FEATURES
- 400ft Transmission Range between TX and RX(LOS)
- 300ft Transmission Range between TX and APP(LOS)
- Integrated Cold Shoe for Quick Installation
- Lowest Transmission Latency 0.08s
- SDI Input & HDMI Input at TX
- SDI Output & HDMI Output at RX
- Supports DC Power Supply, USB Type-C Power Supply and Battery Power Supply
- 1 Transmitter Supports 2 Receivers(1 Transmitter Supports 1 Receiver and 2 APPs Monitoring, or 1 Transmitter Supports up to 4 APPs Monitoring Without Receiver)
- Supports Smart Channel Selection
- Supports APP Firmware Upgrade
- Direct Data Stream from RX for Live Streaming
PACKING LIST
1 TX WITH 1 RX PACKING
Transmitter x1
Receiver x1
Antenna x5
DC Adapter x1
User Guide x1
SINGLE RECEIVER PACKING
Receiver x1
Antenna x3
DC Adapter x1
User Guide x1
TYPICAL SETUP
1 TX-1 RX SETUP
1 TX-2 RX SETUP
PRODUCT INTERFACES
TRANSMITTER
- Antenna Interface
- Fan Air Outlet
- SDI Input
- OLED Display Screen
- UP
- OK
- DOWN
- Cold Shoe
- USB Type-C Interface
- Power Switch
- HDMI Input
- DC Input
RECEIVER
- Antenna Interface
- Fan Air Outlet
- SDI Output
- OLED Display Screen
- UP
- OK
- DOWN
- Cold Shoe
- USB Type-C Interface
- Power Switch
- HDMI Output
- DC Input
INSTALLATION
Step 1.
Install the antennas as demonstrated.
Step 2.
Secure the cold shoe with 1/4 screw hole at the bottom of the transmitter and mount it to the camera.
Step 3.
Connect the HDMI input or SDI input of the transmitter with camera's by HDMI or SDI cable.
Step 4.
Connect to a power supply(compatible with NP-970 battery or the same series of the batteries).
Step 5.
Turn on the devices.
OLED DISPLAY
TRANSMITTER
- Device Number
- WIFI Signal Strength
- Scene Mode
- USB Flash Detection Indicator
- Device ID
- Channel Display
- Video Format
- Fan Status
- Battery Voltage Display
RECEIVER
- Device Number
- WIFI Signal Strength
- Scene Mode
- USB Flash Detection Indicator
- Device ID
- Chanel Display
- Video Format
- Fan Status
- Battery Voltage Display
- This device supports several power methods, and the device will be charged by the method which has a higher voltage.
![the symbol of Type-C power supply]( "Hollyland - MARS 400S PRO - the symbol of Type-C power supply")
![]()
![the symbol of DC power supply]( "Hollyland - MARS 400S PRO - the symbol of DC power supply")
* The picture on the left shows the symbol of Type-C power supply, the picture on the right shows the symbol of DC power supply.
QUICK GUIDE
ENTER MENU
Long press the "OK" button for 3 seconds to enter the root menu interface. Click "UP" and "DOWN" button to switch menu options, click "OK" to confirm.
CHANNEL CHANGE
Press the button "UP/DOWN" on the transmitter or the receiver to change the current channel. Press "OK" to confirm the channel number, then the channel of the receiver and the transmitter will be synchronously and automatically changed.
PULL STREAM FROM RECEIVER
- Confirm there is video format display on both transmitter and receiver. Use the TypeC to Lan Connector to connect the laptop and RX.
- Go to the network settings onthe laptop and set it to DHCP mode.
- Go to your live stream software, such as VLC Player, OBS Studio, Vmix, etc., and open the network video source via the RTSP URL: rtsp://192.168.218.25:5554.
APP DOWNLOAD AND CONNECTION
- "HollyView" APP Download
- Connecting Method:
Enter the WiFi connection interface of mobile phone and find out the WiFi named as "HLD + DEVICE ID", and input the WiFi password to connect (Factory Defult Password is: 12345678). After successful connection, you can have the APP monitoring.
PRODUCT PARAMETERS
| Transmitter | Receiver | |
| Interfaces | HDMI Input(Type A Female) SDI Input 2* Antenna Interfaces (RP-SMA Male) DC Input USB Type-C | HDMI Output(Type A Female) SDI Output 2* Antenna Interfaces (RP-SMA Male) DC Input USB Type-C |
| Supply Interfaces | DC Power Input: 6-16V USB Type-C Power Supply: 5V/2A Battery Power Supply: 6-16V DC | DC Power Input: 6-16V USB Type-C Power Supply: 5V/2A Battery Power Supply: 6-16V DC |
| Power Consumption | <11W | <7W |
| Weight | 206g | 206g |
| Dimension | (L*W*H): 110*72*33.5mm (The Battery Plate Exclude) | (L*W*H): 110*72*33.5mm (The Battery Plate Exclude) |
| Input / Output Video Format | HDMI: 480p60 576p50 720p50/59.94/60 1080i50/59.94/60 1080p23.98/24/25/29.9/30 1080p50/59.94/60 SDI: 1080p60/59.94/50(Level A) 1080p60/59.94/50(Level B) 1080i60/59.94/50 1080p30/29.97/25/24/23.98 1080PsF25 720p60/59.94/50 1080PsF24/23.98 | HDMI: 480p60 576p50 720p50/60 1080i50/60 1080p24/25/30 1080p50/60 SDI: 1080p60/50(Level A) 1080i60/50 1080p30/25/24 720p60/50 1080i50(1080PsF25/24/23.98input) 1080i60(1080PsF30/29.97input) |
| Frequency | 5GHz | 5GHz |
| Modulation Mode | OFDM | OFDM |
| Transmission Power | Maximum 21dBm | / |
| Receiver Sensitive | / | -80dBm |
| Transmission Latency | 0.08s | 0.08s |
| Bandwidth | 20MHz | 20MHz |
FAE
If encounter any problems in using the product or need any help, please follow these ways to get more technical support:
Hollyland Products User Group
HollylandTech
HollylandTech
support@hollyland-tech.com
www.hollyland-tech.com
SHENZHEN HOLLYLAND TECHNOLOGY CO,. LTD
8F, 5D Building, Skyworth Innovation Valley, Tangtou, Shiyan, Baoan District Shenzhen, China.
VideosMARS 400S PRO - TUTORIAL VIDEO
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the MARS 400S PRO that isn't answered in the manual? Leave your question here.