Setting The Inverter; Dc Battery Type; For Iss 1Play Tl M; For Iss 1Play Tl - Ingeteam 1PLAY Quick Start Manual

5 Setting the inverter

This chapter describes how to configure the inverter settings when the ISS 1Play has been wired to the
Pylontech battery.
To do so, once all the previous steps have been completed, the following steps must be followed:

5.1 DC Battery type

Please be careful to choose the right battery type when you set up the configuration in
your inverter. The battery or inverter manufacturers have no responsibility on the
damages caused due to incorrect configurations. For instance, if you select "Lead-acid"
as a battery type in the inverter configuration and the battery being used is "Lithium-ion",
the battery might get damaged or experience performance degradation.
It is required to set the DC Battery type: Pylontech Force H1/H2 or Powercube X1/X2

5.1.1 For ISS 1Play TL M

This must be done using the web interface of the inverter. To perform any configuration change, the required
installer access must be entered on the web. When the permission is given, go to:
CONFIGURATION > ADVANCED SETTIGNS > TYPE OF BATTERY > PYLONTECH FORCE H1/H2
CONFIGURATION > ADVANCED SETTIGNS > TYPE OF BATTERY > PYLONTECH POWERCUBE X1/X2
Confirm the desired selection by pressing the "Write" button. A message to confirm the modification will pop
up.

5.1.2 For ISS 1Play TL

This can be done using the "Ingecon Sun Manager" software package (downloadable on www.ingeteam.com)
or through the display:
Using Ingecon Sun Manager:
Settings → 1-.DC BATTERY TYPE: Type of Battery > Lithium: Pylontech Force H1/H2
Settings → 1-.DC BATTERY TYPE: Type of Battery > Lithium: Pylontech Powercube X1/X2
Click on the "Send" button. A screen informing that the configuration was successfully saved must appear
when the settings are correctly applied to the inverter.
Using the Display:
To perform any configuration change through the display, the required installer password must be entered on:
Technical Guide
Figure 1: DC Battery selection on Ingecon Sun Manager.
MAIN MENU > CONFIGURATION > ENTER PASSWORD
19/11/2020
or
or
INGECON SUN STORAGE 1Play
7/11