Table of Contents
Advertisement
2.4.3 Swinging-arm stand ESD
Use the swinging-arm stand ESD only with the
Leica Z6 APO A zoom system, the Z16 APO A with
the large swinging-arm stand, to ensure stability.
To attach the zoom system to the ESD swinging-
arm stand, use the tiltable focusing arm (10446345)
with plug. You can insert the A video/phototube
and the Y tube into the tiltable focusing arm.
Please note the description and safety
instructions in the User Manual M2-105-0.
Assembly of the stand and fastening the tiltable
focusing arm with plug according to User
Manual M2-105-0.
The assembly of the zoom system and the
A video/phototube or Y tube is as described
in Chapter 2.
2.4.4 Large swinging-arm stand
You can use the large swinging-arm stand with
the Leica Z6 APO A or the Z16 APO A. You have
various options for using the zoom system on the
large swinging-arm stand:
– with tiltable focusing arm (10446345) as for the
ESD swinging-arm stand. You can insert the
A video/phototube and the Y tube into the
tiltable focusing arm.
– for use with the motorized focus or focusing
drive with tiltable column, coarse or
coarse/fine, and the carrier (10447196) for the
AS video/phototube or the microscope carrier
(10446394) when you use the A video/phototube
or the Y tube.
– with focusing arm (10446344) when using the
tiltable carrier rod ∅ 25 mm. In the focusing
arm for columns ∅ 25 mm, you can insert the
A video/phototube or Y tube.
Leica Z6 APO A & Z16 APO A – Assembly
Please note the description and safety
instructions in the User Manual M2-105-0.
Assembly of the stand and fastening the focus-
ing arms in accordance with User Manual
M2-105-0.
The assembly of the zoom system and the
video/phototube or Y tube is as described in
Chapter 2.
2.5 OEM
The following focusing arms are available for use
with bonders, probers, machines or working
equipment:
(see diagram 4, p. 20)
– Focusing arm (10446345) with plug receptacles
∅ 15.8mm (5/8)
– Focusing arm (10446344) for round columns,
∅ 25mm, and bonders
– Focusing arm (10446343) for probers
The focusing arms can be used with the A
video/phototube or the Y tube.
The assembly of the zoom system and the
A video/phototube or Y tube is as described
in Chapter 2.
2.6 Adaptation to reprocopy stand
The adapter for reprocopy stands is supplied with
every zoom system. The metal rear side of the
zoom system offers a firm support.
Fasten the adapter to the black rear side of the
zoom system using 3 hollow screws.
Mount the zoom system with mounted adapter
to the reprocopy stand using the fastening
screw.
25
Advertisement
Table of Contents
