Leica DMS1000 With Swing-arm Stand
Baseplate and Vertical Column
Instructions for safe assembly
Due to the heavy weight of the base-
plate, improper use can cause injuries
or damage to the surrounding area. For safety
reasons, use two people for this part of the setup.
General Notes
This chapter shows an example of assem-
bly of the Leica DMS1000 on a swing-arm
stand. Images and descriptions may vary when
using another swing-arm stand.
Leica DMS1000 User Manual
Assembling the column
3
2
1
3
Assembly
1. Push the tapping screw through the base-
plate from below.
2. Fit the serrated lock washer onto the screw.
3. Install the vertical column on the base plate
using the screw.
21