Emspira 3 With Swing-Arm Stand - Leica Emspira 3 User Manual

Emspira 3 With Swing-arm Stand

Instructions for safe assembly
Due to the heavy weight of the
baseplate, improper use can cause
injuries or damage to the surround-
ing area. For safety reasons, use two
people for this part of the setup.
General notes
This chapter shows an example of
assembly of Emspira 3 on a swing-
arm stand. Images and descriptions
may vary when using another
swing-arm stand.
Emspira 3 User Manual
Assembling the column
3
2
1
3
Assembly
1. Push the tapping screw through the base-
plate from below.
2. Fit the serrated lock washer onto the screw.
3. Install the vertical column on the base plate
using the screw.
22