Swinging-Arm Stands - Leica M420 Instruction Manual

Swinging-arm stands

Swinging-arm and table-clamp stands
These stands offer ample space for large
objects such as rocks, metal objects or circuit
boards, which can be manipulated directly on
the surface of the bench. The many possibilities
for adjusting on the column, the horizontal arm
and the inclinable carrier rod enable the working
area to be planned as required.
The inclinable drive housing has a lift of 128mm.
The coarse/fine focusing drive helps to focus
quickly over long distances, and to adjust the
final setting accurately.
The large swinging-arm stand is supplied with
a 550mm long column.
The table-clamp stand (550mm long column)
can be clamped to bench- or table tops having
thicknesses of between 20mm and 50mm, and
also to machines or jigs.
Large swinging-
arm stand
with motor-focus
system
9