12.18. Oven Thermistor
1. Remove the Back plate. (See 12.2. "Back Plate")
2. Disconnect the connector(CN41).
• Disengage the lead wire of the removed connector
(CN41) from each holder.
3. Remove the Heater panel F. (Black arrows : 2 screws)
4. Remove the Oven thermistor. (White arrows : 2 screws)
• To remove it, spread the adiabatic materials at the
location where it is installed.
* During assembly, be careful not to pinch the adiabatic
materials.
12.19. Cooling Fan Motor for the
Circulation Fan
1. Remove the Back plate. (See 12.2. "Back Plate")
2. Disconnect the connector.
3. Remove the Cooling fan motor for the circulation fan. (3
screws)
71
NE-SCV2BPQ