Panasonic NE-SCV2BPQ Service Manual page 70

NE-SCV2BPQ
9. Remove the Exhaust guide U. (4 screws)
10. Remove the Air guide H. (Black arrows: 4 screws; White
arrows: 2 tabs)
11. Remove each Heater panel E (3 screws).
• If they are hard to remove, remove them separately by
unhooking the tabs (3 tabs on each side).
12. Remove the Adiabatic material B. (Black arrows: 2 tabs)
• Raise the tabs with a tool like a flathead screwdriver.
13. Remove the Circulation fan case U. (Black arrows: 30
screws; 2 tabs)
• Slide Circulation fan fase U upward to remove.
12.17. Rear Heater
1. Remove the Circulation fan case U. (See 12.16.
"Circulation Fan Case U")
2. Remove the Heater support. (1 screw)
3. Remove the Rear heater. (Nuts: 2 pieces)
* During assembly, install the Rear heater so that its
terminal tabs point towards the top surface of the oven.
70