Panasonic NE-SCV2BPQ Service Manual page 68

NE-SCV2BPQ
12.13. Door BU / Door AU
1. Remove the Operation panel U. (See 12.9. "Operation
Panel U")
2. Remove the Left side sash and the Sash bracket. (Black
arrow: 1 screw; White arrow: 1 tab)
• Slide Left side sash (Sash bracket) upward to remove.
3. Remove the Door BU. (7 screws)
• Unscrew the top screws last.
• Leave the door closed, and hold the Handle piece to
remove.
4. Leave the door half-open.
5. Remove the Door arm spacer B. (2 screws)
6. Remove the Spring B.
7. Remove the Hinge pins. (1 piece on each side)
• Pull out each pin outward to remove.
8. Remove the Spring B, and pull out the Door AU towards
you to remove.
12.14. Door C / Door Seal
1. Remove the Door AU. (See 12.13. "Door BU / Door AU")
2. Remove the Door C. (Black arrows: 8 screws; White
arrows: 2 screws; Diagonally shaded arrows: 2 screws; 1
countersunk screw; 6 tabs)
* When removing the Door C, keep the Door C upward
not to drop the fixing nuts.
3. Remove the Door seal.
68