Panasonic NE-SCV2BPQ Service Manual page 66

NE-SCV2BPQ
12.10. Display Board / SD Board
1. Remove the Operation panel U. (See 12.9. "Operation
Panel U")
2. Disconnect the connectors (CN13, CN27, CN28).
3. Remove the Display board. (Black arrows: 4 screws;
White arrow: 1 tab)
4. Remove the SD board. (2 screws)
12.11. PC Board / Power Supply PCB
1. Remove the Back plate. (See 12.2. "Back Plate")
2. Disconnect the connector for the PC board.
• Disengage the disconnected lead wire from each holder.
3. Remove the grounding screw. (1 screw)
4. Remove the PC board U. (Black arrows: 3 screws; White
arrow: 2 screws; Diagonally shaded arrows: 4 tabs)
• Slide PC board towards the door, and raise it to remove.
66