Panasonic NE-SCV2BPQ Service Manual page 56

NE-SCV2BPQ
Operation
6 Press the "Start" button.
• Buzzer : 1 time
7 Press the "Start" button.
• Buzzer : 1 time
8 Press the "Start" button.
• Buzzer : 1 time
9 Press the "Stop/Reset" button.
• Buzzer : 1 time
[In the case of deleting the memorized
failure code]
Press the "Start" button for 2 seconds.
• Buzzer : 1 time
10 Press the "Stop/Reset" button for 2
seconds.
• Buzzer : 1 time
a. "U" failure codes except for "U65" and "U66" are not displayed because they are not memorized.
b. "F00" and "F06" are not displayed because they are not memorized.
LCD Display
Display shows the 3rd failure code.
Display shows the 4th failure code.
Display shows the 5th failure code.
Back to the display of Service Tools B.
The failure code is NOT deleted from EEPROM.
When the Memory lock is ON, "Change setting" and
"Set power voltage" are not displayed / operated.
Back to the display of Service Tools B.
The failure code is deleted from EEPROM.
When the Memory lock is ON, "Change setting" and
"Set power voltage" are not displayed / operated.
Show the initial screen.
56
Remark