Panasonic NE-SCV2BPQ Service Manual page 63

12.3. Cover C / Cover B
1. Remove the Front cover and the Oil tray from the front
surface of the lower part of the oven.
2. Turn over the product.
3. Remove the Cover C. (Black arrows: 4 screws; White
arrow: 1 tab)
4. Disconnect the 2 lead wires from the connector of each
Magnetron.
5. Remove the Cover B. (Black arrows: 6 screws; White
arrows: 3 tabs)
• Slide Cover B towards the rear of the oven, and raise it to
remove.
• Turn over the Cover B while disengaging the lead wires
from the Inverter cover holders.
12.4. H.V.Inverter
1. Remove the Cover B. (See 12.3 "Cover C / Cover B")
2. Undo the ground wire nut to remove the ground wire.
* During assembly, be sure to secure the ground wire to
Cover B.
3. Disengage the lead wires from the holders.
4. Remove the Inverter cover. (Black arrows: 3 tabs each)
5. Disconnect the connectors (CN701, CN702, CN703). (3
places each)
6. Remove the H.V.Inverter. (Black arrow: 1 fixing nut each;
White arrow: 1 grounding screw each; Diagonally shaded
arrows: 4 tabs each)
63
NE-SCV2BPQ