10.2. Procedure for showing the failure code
10.2.1. How to call up or erase the memory
Follow the steps below to call up the failure code.
• If you call up a failure code that is not stored in memory, the message "No Failure code" appears.
• 5 failure codes can be stored.
• Failure codes are stored in PC Board
Operation
1
Open the door and keep the door open.
2
Press the "Start" button for 2 seconds.
• Buzzer : 1 time
3
Press the "Stop/Reset" button 3 times.
• Buzzer : 1 time at the 3rd time pressing
4
Press the "Recall failure code" button.
• Buzzer : 1 time
5
Press the "Start" button.
• Buzzer : 1 time
LCD Display
Show the initial screen.
Show the display of Service Tools B.
When the Memory lock is ON, "Change setting" and
"Set power voltage" are not displayed / operated.
Display shows the latest failure code.
55
NE-SCV2BPQ
Remark