Troubleshooting Guide - Panasonic NE-SCV2BPQ Service Manual

11 Troubleshooting Guide

11.1. Precautions when repairing
To prevent accidents during repair and ensure your safety after the repair, be sure to read or refer to "Safety Precautions" describing
precautions that you must observe when repairing.
11.2. Before repair
11.2.1. Removal of Oil Tray
If you vertically flip the oven with Oil Tray attached, the oil in Oil
Tray will leak into the oven.
Remove Oil Tray in advance.
(See 8.6. "Care of your oven")
11.2.2. High voltage capacitor discharging
If you have to inspect a part of the oven being energized, be
sure to unplug Power Supply Plug to discharge the high voltage
capacitor of H.V. Inverter.
• How to discharge the capacitor: Use a tool such as needle-
nose plier to get the heater terminal of Magnetron shorted
with the oven.
11.2.3. Cover B grounding
Make sure that the earth wire is properly secured to Cover B.
Otherwise, an electric shock may occur.
11.3. Checking of energization after
repair
After repair, follow the steps below to perform an energization
check.
1. Connect the disconnected connector.
2. Temporarily attach Covers.
3. Perform an energization check.
57
NE-SCV2BPQ