Preface - Linak 273 Series Instructions For Installation And Use Manual

Instruction Manual for TECH-system type 273

Preface

Dear User,
Thank you for choosing an actuator system from LINAK . LINAK systems consist of hi-tech products
®
that are based on many years of experience with the production and development of actuators,
electronic control boxes, control units and chargers.
The TECH-systems is composed of LINAK actuators and a motor control unit developed and
produced by third party manufacturers. The function and operational reliability of TECH-systems have
been tried and tested in a wide range of different situations. In addition, we continuously improve our
products and systems so as to accommodate customer requirements.
This instruction manual describes how to install and maintain your TECH-system. We are sure that
your TECH-system will provide you with many years of problem-free operation.
Before our products leave our factory, they always undergo comprehensive quality and function tests.
In the unlikely event that you should experience any problems with your systems, please contact
LINAK Danmark A/S on +45 8680 3611.
LINAK provides a warranty on all its products and systems. However, this warranty is provided on
condition that the product is used in accordance with the applicable specifications, that maintenance
is performed correctly, and that any repairs are carried out at a workshop that is authorised to repair
LINAK products.
Any changes to the installation and use of LINAK systems may affect their operation and durability.
The products must never be opened by non-authorised persons.
LINAK Danmark A/S
Mønstedsvej 9
DK-8600 Silkeborg
Page 2 of 44 june 2020 ver.11
LINAK Danmark A/S Mønstedsvej 9 DK-8600 Silkeborg Tel. +45 8680 3611 Fax: +45 86829051 linak@linak-silkeborg.dk www.linak.dk