Pressure Controller Compatibility; Recommended Tools And Consumables; Installation/Maintenance Tools; Lubrication & Thread Sealant - GF NeoFlow DN200 Operating Instructions Manual

1.11.3 PRESSURE CONTROLLER COMPATIBILITY

Controller Compatible
I20
GCR
HWM

1.12 RECOMMENDED TOOLS AND CONSUMABLES

1.12.1 INSTALLATION/MAINTENANCE TOOLS

•
Spanners/sockets (full set)
•
Flat head screwdrivers
•
Torque wrenches
•
Allen/hex keys (full set, ball-ended)
1.12.2 LUBRICATION & THREAD SEALANT
Lubrication
The manufacturer approved lubricant for all static seals is any generic WRAS approved silicone
grease, for instance SGM494.
The manufacturer approved grease for all dynamic seals is Molykote 111 (WRAS approved).
Thread Sealants
The manufacturer approved thread sealant for all metal thread inserts on the valve body is Loctite
5331 (WRAS approved).
The manufacturer approved thread sealant for all metal-on-metal threads is Loctite 5400 (WRAS
Approved).
Replace pilot and control block with i20 system. Addition
YES connection ports provided on request to connect to i20
YES
Replace pilot set bolt with an M10 controller bolt
YES
Comments
controller
18