Connecting And Installing The Duofern Universal Actuator 9470-1 - RADEMACHER DuoFern Universal 9470-1 Instruction Manual

8.3 Connecting and installing the DuoFern
i
Universal Actuator 9470-1
1.
Ensure the mains is disconnected and check whether the mains
power leads are current-free.
2.
Securely lay the connecting cables right into the flush-mounted
box of the DuoFern Universal Actuator 9470-1.
3.
Remove the insulation on all leads as specified above and con-
nect them according to the following connection diagram.
4.
Insert the DuoFern Universal Actuator 9470-1 into the flush-mount-
ed box and lay the connecting cables as well as the antenna in
the box.
5.
Finally, install the cover of the flush-mounted box and switch on
the electricity again.
EN
25