8.2 Connecting and installing the DuoFern
i
Tubular Motor Actuator 9471-1
1.
Ensure the mains are current-free and check whether the inlet
leads are current-free.
2.
Securely lay all connecting cables right into the flush-mounted
box.
3.
Remove the insulation on all leads down to 9 mm as specified
above and connect them according to the following connection
diagram.
4.
Insert the DuoFern Tubular Motor Actuator 9471-1 into the
flush-mounted box and lay the connecting cables as well as the
antenna in the box.
5.
Finally, install the cover of the flush-mounted box and switch on
the mains power supply again.
EN
21