RADEMACHER DuoFern Universal 9470-1 Instruction Manual page 30

i
10. Deleting all settings (reset)
A reset can be carried out to reset the DuoFern Universal Actuator
9470-1 to the default factory settings.
1.
2.
All of the settings are deleted and reset to the default factory set-
tings and the logged-on DuoFern transmitters are automatically
logged off.
3.
The DuoFern Universal Actuator 9470-1 is then reset to the default
factory settings.
i
11. Dismantling
There is a risk of fatal electric shock when touching electri-
cal components.
◆ Disconnect all phases of the mains power lead and secure
it to prevent any reconnection. Check that the system is
de-energised.
1.
Log the DuoFern controller off from the DuoFern network.
2.
Ensure the mains power is current-free and open the
flush-mounted box.
3.
Disconnect the DuoFern Universal Actuator 9470-1 and com-
pletely remove it from the flush-mounted box.
30
Press and hold the disconnect button for approx.
5 sec. until the STATUS LED constantly lights up red.
DANGER!
EN