Pressure
Surfaces, edges,
corners
Equipment
modification
•
The use of pressurized air and fluids (paints or solvents)
presents risks for the user and the equipment.
•
Never exceed the maximum working pressures of the equipment,
components and accessories.
•
For all cleaning, inspection and maintenance operations on the
equipment,
it
decompression, shutdown, locking of any residual
elimination of residual static electricity charges and purging of fluids.
•
Some component surfaces may be hot during operation.
Skin contact with hot surfaces causes severe skin burns.
Handle open or sharp-edged components with care. Wear
•
protective gloves.
•
Under no circumstances should this equipment be modified or used
for purposes not intended.
•
Parts and accessories must only be supplied or approved by SAMES
KREMLIN.
•
SAMES KREMLIN cannot be held responsible for personal injury as
well as breakdowns and/or damage resulting from modifications to
the equipment.
•
Any modification of equipment made by the user and not
authorized by SAMES KREMLIN will result in loss of certification.
is
imperative
to
6
follow
the
procedures
for
pressure,